Buckner’s Liebherr crawler crane is erecting eight new wind turbines in the surfers paradise.
A Liebherr crawler crane of type LR 11000 from the fleet of Buckner HeavyLift Cranes is currently in use in Hawaii.
A crawler crane of type LR 11000 has been working in Hawaii for three months.
New Vestas wind turbines with a hub height of 344 feet have been under construction there for over three months. A major advantage is the possibility to move the crane without a derrick, as the deployment area is in extremely hilly terrain.
The LR 11000, which has been in use on the Hawaiian island of O’ahu since the beginning of October, is the biggest crawler crane that has ever worked in the American surfers paradise. Buckner’s 1000-tonner will be in use until the end of December erecting new wind turbines of the type Vestas V-136. A total of eight new turbines are being installed here on the island’s north shore. They form part of the Hawaiian energy supplier’s plan to expand the proportion of renewable energies from 18 percent currently to over 65 percent in the year 2030.
For this deployment, the LR 11000 is set up in the SL3F configuration with a main jib of 354 feet and a fixed tip of 39 feet. In this configuration, the crane has a max. load capacity of 173 tons. When erecting the new wind turbines, the heaviest parts – the hub with motor casing and drive-train – weigh about 100 tons; the crawler crane has to lift this weight to the hub height of 105 metres. Equipped with 90 tons of central ballast and a slewing platform ballast of 250 tons, the crane can be used without a derrick. This was an important criterion when selecting the right crane for this job, as the wind farm sits in extremely hilly terrain on which the crane has to be frequently moved and occasionally converted. Deployments without a derrick can take place much more easily here and thus faster, too.
In addition to the LR 11000, other auxiliary cranes are used, including a Liebherr crawler crane of type LR 1350/1. The biggest challenge on the island, which lies far from the U.S. mainland, is the supply of spare parts.
“Our construction site is supplied from the new Liebherr warehouse in Lodi, CA, but for safety’s sake we also have various tools and spare parts available locally for this job,” said Kevin C. Long, director sales, Buckner. ”So far, however, we have managed to do entirely without spare parts and erection engineers.”
The Liebherr crawler crane of Buckner is erecting eight new wind turbines in the surfers paradise.